İyonik-iyonik olmayan surfaktantlarda faz dönüşüm sıcaklığı

dc.contributor.advisorİşcan, Mehmet
dc.contributor.authorBayrak, Yüksel
dc.date.accessioned2024-06-11T20:39:27Z
dc.date.available2024-06-11T20:39:27Z
dc.date.issued2002
dc.departmentEnstitüler, Fen Bilimleri Enstitüsü, Kimya Ana Bilim Dalıen_US
dc.descriptionBu tezin, veri tabanı üzerinden yayınlanma izni bulunmamaktadır. Yayınlanma izni olmayan tezlerin basılı kopyalarına Üniversite kütüphaneniz aracılığıyla (TÜBESS üzerinden) erişebilirsiniz.en_US
dc.descriptionDoktoraen_US
dc.description.abstractÖZET Surfaktantlarla kararlılaştınlmış yağ ve suyun termodinamik bakımdan kararlı dispersiyonlan olan mikroemülsiyon sistemlerinin faz diyagramları üzerine sıcaklığın etkisini incelemeyi amaçlayan bu çalışmada surfaktant olarak Triton (X-100, X-114, X-405) seçilmiştir. Faz diyagramı sabit sıcaklıkta titrasyon yöntemi ile tayin edilmiştir. lOmL'lik santrifüj tüplerine surfaktant, alkol ve yağ ilave edildikten sonra su ile titre edilmiştir. Titrasyonun son noktası kalıcı bulanıklığın ortaya çıkışı ile saptanmıştır. Faz diyagramlarının incelenmesi sonucunda surfaktant / kosurfaktant oranının ve surfaktantın polioksietilen zincir uzunluğunun, çözünürleştirme oranını değiştirdiği bulunmuştur. Triton X-100/«-butanol, heksan, tuzlu su sisteminde faz dönüşüm sıcaklığının ~45°C olduğu, surfaktantın zincir uzunluğunun bu sıcaklığı değiştirdiği saptanmıştır. Surfaktant, yağ ve elektrolit tipi sistemlerin faz davranışında ortaya çıkan üç fazlı bölgenin oluşumunu etkileyen; sırasıyla sodyum sülfat, sodyum klorür, sodyum bromür, sodyum iyodür ve sodyum rodanür'ün bu bölgeyi yüksek sıcaklıklarda gerçekleştirdiği gözlenmiştir.en_US
dc.description.abstractn ABSTRACT In this study, Triton (X-100, X-114, X-405) has been selected as surfactant in order to examine the effect of the temperature on the phase diagrams of microemulsion systems formed by the dispersions of oil and water which were determined thermodynamically by surfactants. The phase diagram was designated by titration method at constant temperature. Following the addition of surfactant, alcohol and oil into the centrifuge tubes of 10 mL, it was titrated with water. The final point of the titration was detected with the appearance of constant turbidity. At the end of the examining of phase diagrams, it was found that surfactant/cosurfactant ratio and polyoxyethylene chain length of surfactant had changed the dissolution ratio. It was detected that in Triton X-lOO/72-butanol, hexane, salty water system, phase inversion temperature was ~45°C and the length of the surfactant chain had changed this temperature. It was observed that surfactant had effected the three phase area formation which occurs in the phase behaviour of oil and electrolyte systems and sodium sulphate, sodium chloride, sodium bromide, sodium iodide and sodium rodanur had achieved this area at higher temperatures.en_US
dc.identifier.endpage139en_US
dc.identifier.startpage1en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14551/9681
dc.identifier.yoktezid133156en_US
dc.institutionauthorBayrak, Yüksel
dc.language.isotren_US
dc.publisherTrakya Üniversitesien_US
dc.relation.publicationcategoryTezen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectKimyaen_US
dc.subjectChemistryen_US
dc.titleİyonik-iyonik olmayan surfaktantlarda faz dönüşüm sıcaklığıen_US
dc.title.alternativePhase inversion temperature in ionic-nonionic surfactantsen_US
dc.typeDoctoral Thesisen_US

Dosyalar