THE THEORETICAL AND PRACTICAL STUDY ABOUT INCREASING THE CAPACITY OF AUTOCLAVE HEAT EXCHANGER
Küçük Resim Yok
Tarih
2010
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Turkish Soc Thermal Sciences Technology
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Lamination process is the last step of the automobile windshield production which is carried out at the autoclave cabin by high pressure and temperature. First, raising of the temperature and pressure takes place. Then by means of cooling and air releasing the process is completed. In order to shorten the autoclave cycle time, the elements and operating parameters causing the variability in the autoclave cycle times has been analyzed according to the heat transfer laws. Design changes based on mentioned scientific analysis were evaluated as comparison. The best design was manufactured and implemented. The operating parameters of the autoclave were monitored both before and after the implementation of design changes. The implemented theoretical and practical study prove that decreasing the cooling time of autoclave 20% without loss of product quality is possible and can be repeated.
Açıklama
Anahtar Kelimeler
Laminated Auto Glass, Autoclave Cycle, Heat Exchanger, Lamination Process
Kaynak
Isi Bilimi Ve Teknigi Dergisi-Journal Of Thermal Science And Technology
WoS Q Değeri
Q4
Scopus Q Değeri
Cilt
30
Sayı
2
