Joining of stainless steel and copper materials with friction welding

Basit Öğe Kaydı
dc.contributor.authorSahin, Mumin
dc.date.accessioned2024-06-12T11:02:18Z
dc.date.available2024-06-12T11:02:18Z
dc.date.issued2009
dc.departmentTrakya Üniversitesien_US
dc.description.abstractPurpose - The purpose of this paper is to investigate mechanical and metallurgical variations at interfaces of commercial austenitic-stain less steel and copper materials welded by friction welding. Design/methodology/approach - In this paper, austenitic-stain less commercial steel and copper materials are welded using the friction welding method. The optimum parameters are obtained for the joints. The joints are applied to the tensile and micro-hardness tests. Then, micro- and macro-photos of the joints are examined. Findings - It is found that some of the welds show poor strength depending on some accumulation of alloying elements at the interface result of temperature rise and the existence of intermetallic layers. Research limitations/implications - It would be interesting to search about the toughness values and fatigue behaviour of the joints. It could be a good idea for future work to concentrate on the friction welding of these materials. Practical implications - Friction welding can be achieved at high-production rates and therefore is economical in operation. In applications where friction welding has replaced other joining processes, the production rate has been increased substantially. Originality/value - The main value of this paper is to contribute to the literature on friction welding of dissimilar materials.en_US
dc.identifier.doi10.1108/00368790910988435
dc.identifier.endpage324en_US
dc.identifier.issn0036-8792
dc.identifier.issue6en_US
dc.identifier.scopus2-s2.0-70350164854en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage319en_US
dc.identifier.urihttps://doi.org/10.1108/00368790910988435
dc.identifier.urihttps://hdl.handle.net/20.500.14551/21221
dc.identifier.volume61en_US
dc.identifier.wosWOS:000271209200005en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherEmerald Group Publishing Limiteden_US
dc.relation.ispartofIndustrial Lubrication And Tribologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFriction Weldingen_US
dc.subjectStainless Steelen_US
dc.subjectCopperen_US
dc.subjectAisi-304en_US
dc.subjectCarbonen_US
dc.titleJoining of stainless steel and copper materials with friction weldingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu