Joining of stainless steel and copper materials with friction welding
Küçük Resim Yok
Tarih
2009
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Emerald Group Publishing Limited
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Purpose - The purpose of this paper is to investigate mechanical and metallurgical variations at interfaces of commercial austenitic-stain less steel and copper materials welded by friction welding. Design/methodology/approach - In this paper, austenitic-stain less commercial steel and copper materials are welded using the friction welding method. The optimum parameters are obtained for the joints. The joints are applied to the tensile and micro-hardness tests. Then, micro- and macro-photos of the joints are examined. Findings - It is found that some of the welds show poor strength depending on some accumulation of alloying elements at the interface result of temperature rise and the existence of intermetallic layers. Research limitations/implications - It would be interesting to search about the toughness values and fatigue behaviour of the joints. It could be a good idea for future work to concentrate on the friction welding of these materials. Practical implications - Friction welding can be achieved at high-production rates and therefore is economical in operation. In applications where friction welding has replaced other joining processes, the production rate has been increased substantially. Originality/value - The main value of this paper is to contribute to the literature on friction welding of dissimilar materials.
Açıklama
Anahtar Kelimeler
Friction Welding, Stainless Steel, Copper, Aisi-304, Carbon
Kaynak
Industrial Lubrication And Tribology
WoS Q Değeri
Q4
Scopus Q Değeri
Q3
Cilt
61
Sayı
6
