An investigation on the effect of dimensional differences in friction welding of AISI 1040 specimens
Küçük Resim Yok
Tarih
2003
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Most of the machine parts can be produced using several manufacturing methods, such as forging, machining, casting or welding. The type of manufacturing method may be selected with respect to production costs of the alternatives for individual parts. In the presented study, an experimental friction welding set-up was designed and constructed in order to investigate the effects of some welding parameters on the welding quality. The set-up was constructed as continuous-drive, Several groups of specimen were machined from the same material, Some pilot welding experiments under different process parameters were carried out in order to obtain optimum parameters according to statistical approach. The strengths of the joints were determined by tension tests, and the results were compared with those of specimen's material. Addition to the tensile test data, hardness variations and microstructures in the welding- zone were obtained and examined.
Açıklama
Anahtar Kelimeler
Friction; Manufacturing Industries; Steel; Tensile Strength; Welding, Microstructure; Statistical Methods; Steel; Tensile Strength; Tensile Testing; Manufacturing Industries; Friction Welding
Kaynak
Industrial Lubrication and Tribology
WoS Q Değeri
Scopus Q Değeri
Q3
Cilt
55
Sayı
5
