Characterization of properties in friction-welded austenitic-stainless steel and aluminium joints

Basit Öğe Kaydı
dc.contributor.authorSahin, Mumin
dc.date.accessioned2024-06-12T11:02:17Z
dc.date.available2024-06-12T11:02:17Z
dc.date.issued2014
dc.departmentTrakya Üniversitesien_US
dc.description.abstractPurpose - The main purpose of the present study was to evaluate the metallurgical and mechanical properties of dissimilar metal friction welds (FWs) between aluminium and type 304 stainless steel. Design/methodology/approach - One of the manufacturing methods used to produce parts made from different materials is the FW method. Therefore, in the present study, austenitic stainless steel and aluminium parts were joined by FW. Tensile, fatigue and notch-impact tests were applied to FW specimens, and the results were compared with those for the original materials. Microstructure, energy dispersive X-ray (EDX) and X-ray diffraction (XRD) analysis and hardness variations were conducted on the joints. Findings - It was found from the microstructure and XRD analysis that inter-metallic phases formed in the interface which further caused a decrease in the strength of the joints. Research limitations/implications - In this study, the rotation speed was kept constant. The effects of the rotation speed on the welding quality can be examined in future. It is important to note that the FW process was successfully accomplished in this study although it was particularly difficult to obtain the weld due to the large deformations at the interface. Practical implications - Low-density components such as aluminium and magnesium can be joined with steels owing to being cost-effective in industry. Application of classical welding techniques to such materials is difficult because they have different thermal properties. Their welding plays a key part in industrial quality and process control, in the efficient use of energy and other resources, in health and safety. Then, this study will contribute for welded, brazed and soldered materials. Originality/value - The main value of this paper is to contribute and fulfill the influence of the interface on properties in welding of various materials that is being studied so far in the literature.en_US
dc.identifier.doi10.1108/ILT-11-2011-0100
dc.identifier.endpage271en_US
dc.identifier.issn0036-8792
dc.identifier.issn1758-5775
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-84897830249en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage260en_US
dc.identifier.urihttps://doi.org/10.1108/ILT-11-2011-0100
dc.identifier.urihttps://hdl.handle.net/20.500.14551/21215
dc.identifier.volume66en_US
dc.identifier.wosWOS:000333508700012en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherEmerald Group Publishing Ltden_US
dc.relation.ispartofIndustrial Lubrication And Tribologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFriction Weldingen_US
dc.subjectJoining Processesen_US
dc.subjectProcess Parametersen_US
dc.subjectWelding Processen_US
dc.subjectAlloyen_US
dc.subjectInterfaceen_US
dc.subjectAisi-304en_US
dc.titleCharacterization of properties in friction-welded austenitic-stainless steel and aluminium jointsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu