Optimum operating conditions in drying of polyester based yarn bobbins with a pressurized hot air dryer

Basit Öğe Kaydı
dc.authorscopusid6603854266
dc.authorscopusid6602300270
dc.authorscopusid6506635786
dc.authorscopusid23984042700
dc.contributor.authorCihan A.
dc.contributor.authorKahveci K.
dc.contributor.authorAkyol U.
dc.contributor.authorAkal D.
dc.date.accessioned2024-06-12T10:29:30Z
dc.date.available2024-06-12T10:29:30Z
dc.date.issued2011
dc.description9th IASME / WSEAS International Conference on Fluid Mechanics and Aerodynamics, FMA'11, 9th IASME / WSEAS International Conference on Heat Transfer, Thermal Engineering and Environment, HTE'11 -- 23 August 2011 through 23 August 2011 -- Florence -- 87776en_US
dc.description.abstractIn this study, optimum operating conditions in drying of polyester based yarn bobbins witha pressurized hot air dryer has been investigated experimentally. For this purpose, experimental drying behaviour of bobbins was determined by an experimental dryer which was designed and anufactured based on hot-air bobbin dryers used in the textile industry. Drying parameters were drying temperature, drying pressure and volumetric flow rate of drying air. Optimum operating conditions were considered with respect to the drying time and energy consumption. The results show that totaldrying time is strongly dependent on drying pressure, drying temperature and volumetric flow rate and increase at these parameters shortens the drying time considerably. The results also show that the minimum energy consumption is for lower values of drying temperature and drying pressure and modest and higher values of volumetric flow rate.en_US
dc.identifier.endpage179en_US
dc.identifier.isbn9.78162E+12
dc.identifier.scopus2-s2.0-83655198114en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage176en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14551/17785
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.relation.ispartofRecent Advances in Fluid Mechanics and Heat and Mass Transfer - Proc. of the 9th IASME / WSEAS Int. Conf. on Fluid Mechanics and Aerodynamics, FMA'11, Proc. of the 9th IASME / WSEAS Int. Conf. HTE'11en_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBobbin; Drying; Energy Consumption; Moisture Ratio; Polyesteren_US
dc.subjectDrying Air; Drying Behaviours; Drying Parameters; Drying Temperature; Drying Time; Hot Air; Hot-Air Dryers; Minimum Energy; Moisture Ratio; Optimum Operating Conditions; Volumetric Flow Rate; Aerodynamics; Air; Bobbins; Dryers (Equipment); Energy Utilization; Esters; Flow Rate; Fluid Mechanics; Heat Transfer; Mass Transfer; Polyesters; Printing Presses; Textile Industry; Textile Processing; Wool; Yarn; Dryingen_US
dc.titleOptimum operating conditions in drying of polyester based yarn bobbins with a pressurized hot air dryeren_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu