Mechanical and Metallurgical Properties of Aluminium and Copper Sheets Joined by Cold Pressure Welding

Basit Öğe Kaydı
dc.authoridOzel, Kaan/0000-0001-5778-5978
dc.authorwosidOzel, Kaan/HKF-7024-2023
dc.contributor.authorOzel, Kaan
dc.contributor.authorSahin, Mumin
dc.contributor.authorAkdogan, Aysegul
dc.date.accessioned2024-06-12T10:58:04Z
dc.date.available2024-06-12T10:58:04Z
dc.date.issued2008
dc.departmentTrakya Üniversitesien_US
dc.description.abstractCold pressure welding is a special welding method that has been used in applications such as assembly of various parts at an increasing rate in recent years. In the present paper, cold pressure welding was applied to commercial purity aluminium and copper sheets as lap welding and a 150 metric ton hydraulic press was used for the process. As the surface roughness and the weld deformation ratia of aluminium sheets increased, tensile strength of the joints also increased Purchased specimens with original roughness had the lowest weld deformation as-is and it was not possible to join these sheets at 30% weld deformations. Fatigue tests showed that joined sheets resisted against low fluctuating tensile stresses. Hardness increases due to local hardening at the interface as a result of cold deformation. Also EDX (Energy Dispersive X-ray) measurements clearly show that Al-Cu joints contain an intermetallic compound layer at the interlace which does not affect the joint strength to a great extent. Results showed that the cold pressure welding technique in lap form resulted in strong Al-Al joints and the intermetallic layer formed in Al-Cu joints did not affect the joint strength to a great extent. (C) 2008 Journal of Mechanical Engineering. All rights reserved.en_US
dc.identifier.endpage806en_US
dc.identifier.issn0039-2480
dc.identifier.issue11en_US
dc.identifier.scopus2-s2.0-56549093442en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage796en_US
dc.identifier.urihttps://hdl.handle.net/20.500.14551/19927
dc.identifier.volume54en_US
dc.identifier.wosWOS:000261351300006en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherAssoc Mechanical Engineers Technicians Sloveniaen_US
dc.relation.ispartofStrojniski Vestnik-Journal Of Mechanical Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCold Pressure Weldingen_US
dc.subjectMetallographyen_US
dc.subjectMechanical Propertiesen_US
dc.subjectSurface Roughnessen_US
dc.subjectDeformation Ratioen_US
dc.subjectOptimizationen_US
dc.subjectParametersen_US
dc.subjectSteelen_US
dc.subjectStateen_US
dc.subjectFoilsen_US
dc.titleMechanical and Metallurgical Properties of Aluminium and Copper Sheets Joined by Cold Pressure Weldingen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu