OPTIMIZING THE PARAMETERS FOR FRICTION WELDING STAINLESS STEEL TO COPPER PARTS

Basit Öğe Kaydı
dc.contributor.authorSahin, Mumin
dc.date.accessioned2024-06-12T11:02:17Z
dc.date.available2024-06-12T11:02:17Z
dc.date.issued2016
dc.departmentTrakya Üniversitesien_US
dc.description.abstractSt-Cu (stainless steel and copper) parts were friction welded with the aim to optimize the process parameters in the present study. The joints obtained with various process-parameter combinations were subjected to a tensile test. Empirical relationships were developed to predict the strength of the joints using RSM (the response-surface methodology) and the coherency of the model was tested. The tensile properties, microhardness variations, SEM, the EDS analysis and X-ray diffraction (XRD) analysis of the welded specimens were evaluated. It was found, with an ANOVA analysis, that the friction pressure/friction time relation has the largest influence on the tensile strength of the joints followed by the rotational speed. However, it was also found that the formation of intermetallics at the interface is responsible for a higher hardness and lower tensile strength of the friction-welded stainless steel-copper joints.en_US
dc.identifier.doi10.17222/mit.2015.023
dc.identifier.endpage115en_US
dc.identifier.issn1580-2949
dc.identifier.issn1580-3414
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-84958166081en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage109en_US
dc.identifier.urihttps://doi.org/10.17222/mit.2015.023
dc.identifier.urihttps://hdl.handle.net/20.500.14551/21219
dc.identifier.volume50en_US
dc.identifier.wosWOS:000370993000018en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherInst Za Kovinske Materiale I In Tehnologieen_US
dc.relation.ispartofMateriali In Tehnologijeen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectFriction Weldingen_US
dc.subjectMetallurgyen_US
dc.subjectResponse-Surface Methodologyen_US
dc.subjectTensile Strengthen_US
dc.subjectAisi-304en_US
dc.subjectCarbonen_US
dc.subjectJointen_US
dc.titleOPTIMIZING THE PARAMETERS FOR FRICTION WELDING STAINLESS STEEL TO COPPER PARTSen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu