Material flow analysis of bimetallic hollow disc upsetting
Küçük Resim Yok
Tarih
2016
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Czech University of Life Sciences Prague
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Bimetallic materials have a growing area of usage and named a type of composite materials with combining advantageous features of two different materials. Upsetting of discs obtained by aluminum and copper was studied. The FEM method was used to simulate the process and results were compared with experiments by taking material flow into account. It was determined that material flow increased with height and reduction rates and on the middle axis the material flow was highest. On the interfaces of sleeve and core materials separation after forming was not observed. Also, it was understood that simulation results of bimetallic disc sample obtained with FEM based DEFORM-3D software in upsetting procedure were in concordance with experimental results and FEM model can be useful for future studies. © 2016 Czech University of Life Sciences Prague. All Rights Reserved.
Açıklama
6th International Conference on Trends in Agricultural Engineering 2016, TAE 2016 -- 7 September 2016 through 9 September 2016 -- -- 128604
Anahtar Kelimeler
Bimetallic Materials; Deform-3d; Finite Element Method; Load Analysis; Material Flow; Upsetting, Agriculture; Computer Software; Coremaking; Finite Element Method; Upsetting (Forming); Core Material; Deform-3d; Fem Modeling; Hollow Discs; Load Analysis; Material Flow; Material Flow Analysis; Reduction Rate; Agricultural Engineering
Kaynak
TAE 2016 - Proceedings of 6th International Conference on Trends in Agricultural Engineering 2016
WoS Q Değeri
Scopus Q Değeri
N/A
Cilt
2016-September
