The effects of casting and forging processes on joint properties in friction-welded AISI 1050 and AISI 304 steels

Basit Öğe Kaydı
dc.contributor.authorSunay, Tolga Y.
dc.contributor.authorSahin, Mumin
dc.contributor.authorAltintas, Sabri
dc.date.accessioned2024-06-12T11:02:17Z
dc.date.available2024-06-12T11:02:17Z
dc.date.issued2009
dc.departmentTrakya Üniversitesien_US
dc.description.abstractThe aim of the present study was to investigate the effects of investment casting and forging process on the microstructure and mechanical properties of friction weldments, AISI 1050-AISI 304. A continuous-drive friction welding device with the automatic control ability of friction time and forging pressure was designed and constructed. Factorial design of experiments was performed to join investment cast AISI 1050 steels and forged AISI 1050 steels with AISI 304 austenitic stainless steel with respect to the optimized process parameters. The joint performance was evaluated by tensile and hardness tests performed parallel and perpendicular to the weld interface. Microstructure of forged parts under friction welding was examined using optical microscopy, scanning electron microscopy, and energy-dispersive spectroscopy. Results of microstructural studies were compared with those of friction welding of investment cast parts. The results reveal that a recrystallized region or a mechanically mixed layer was formed on the AISI 304 side near the weld interface, depending on friction time and friction pressure. Friction welding of forged parts always exhibited higher tensile strength, lower hardness, and more upset than the cast parts.en_US
dc.description.sponsorshipBogazii University/ Istanbul-Turkey; TUBITAK MRC/Gebze-Turkeyen_US
dc.description.sponsorshipThe authors would like to thank Bogazii University/ Istanbul-Turkey and TUBITAK MRC/Gebze-Turkey.en_US
dc.identifier.doi10.1007/s00170-008-1810-0
dc.identifier.endpage79en_US
dc.identifier.issn0268-3768
dc.identifier.issn1433-3015
dc.identifier.issue1-2en_US
dc.identifier.scopus2-s2.0-68849102453en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage68en_US
dc.identifier.urihttps://doi.org/10.1007/s00170-008-1810-0
dc.identifier.urihttps://hdl.handle.net/20.500.14551/21218
dc.identifier.volume44en_US
dc.identifier.wosWOS:000268774000007en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherSpringer London Ltden_US
dc.relation.ispartofInternational Journal Of Advanced Manufacturing Technologyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFriction Weldingen_US
dc.subjectMetallographyen_US
dc.subjectCastingen_US
dc.subjectForgingen_US
dc.subjectJoint Propertiesen_US
dc.subjectAustenitic Stainless-Steelen_US
dc.subjectCarbonen_US
dc.titleThe effects of casting and forging processes on joint properties in friction-welded AISI 1050 and AISI 304 steelsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu