Effect of surface roughness on friction coefficients during upsetting processes for different materials

Basit Öğe Kaydı
dc.contributor.authorSahin, Mumin
dc.contributor.authorCetinarslan, Cem S.
dc.contributor.authorAkata, H. Erol
dc.date.accessioned2024-06-12T11:15:53Z
dc.date.available2024-06-12T11:15:53Z
dc.date.issued2007
dc.departmentTrakya Üniversitesien_US
dc.description.abstractPresented study is focused on the investigation of the effect of the surface roughness on the frictional properties for different materials and conditions. Three types of steel, commercially pure aluminium and annealed CuZn40Pb2 brass were used as the test materials in the experimental part of the study. Ring compression test procedure was applied to the specimens using flat end upsetting dies. Dimensional changes of the specimens after the tests were measured in order to obtain the variations of the increments in the inner diameters versus upset ratios. Experimental results were placed into ring compression calibration curves for each of the material type and surface conditions. Roughness measurements were carried out using a digital roughness meter. Upsetting tests were carried out using a hydraulic press of 150 metric tons with 5 mm/s ram speed. (c) 2005 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.matdes.2005.07.019
dc.identifier.endpage640en_US
dc.identifier.issn0264-1275
dc.identifier.issn1873-4197
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-33750378331en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage633en_US
dc.identifier.urihttps://doi.org/10.1016/j.matdes.2005.07.019
dc.identifier.urihttps://hdl.handle.net/20.500.14551/24093
dc.identifier.volume28en_US
dc.identifier.wosWOS:000242859100034en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMaterials & Designen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectSurface Roughnessen_US
dc.subjectFriction Coefficienten_US
dc.subjectRing Compression Testen_US
dc.subjectRing Compression Testen_US
dc.subjectSteelen_US
dc.titleEffect of surface roughness on friction coefficients during upsetting processes for different materialsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu