An experimental study on joining of severe plastic deformed aluminium materials with friction welding method

dc.authoridOzel, Kaan/0000-0001-5778-5978
dc.authorwosidOzel, Kaan/HKF-7024-2023
dc.contributor.authorSahin, Mumin
dc.contributor.authorAkata, H. Erol
dc.contributor.authorOzel, Kaan
dc.date.accessioned2024-06-12T11:19:19Z
dc.date.available2024-06-12T11:19:19Z
dc.date.issued2008
dc.departmentTrakya Üniversitesien_US
dc.description.abstractIn this study, 5083 aluminium alloys, which were exposed to severe plastic deformation, were joined with friction welding method and the variation in mechanical properties of the joints was experimentally investigated. Severe plastic deformation methods can be classified as equal channel angular pressing (ECAP) (in other words, equal cross section lateral extrusion-ECSLE) and cyclic extrusion-compression. Aluminum alloy as test material 5083 and square cross-sectional equal channel angular pressing die for severe plastic deformation were used in the study. Firstly 5083 alloys, as purchased, were joined with friction welding method. The optimum parameters for friction time, upset time, friction pressure and upset pressure, which are necessary for welding, were obtained. Afterwards, 5083 aluminium materials as purchased were prepared as square cross-section and then I-pass severe plastic deformation was applied to specimen by equal channel angular pressing die. The obtained parts as square form were prepared as cylindrical form by machining and then the parts were joined by continuous drive friction welding equipment that was designed and produced in laboratory conditions before. Later, the tensile strengths of the parts, obtained at optimum conditions, were compared with those of the joined parts as purchased form. Then, hardness variations and microstructures of joints were examined. Finally, the obtained results were commented on. (C) 2006 Elsevier Ltd. All rights reserved.en_US
dc.identifier.doi10.1016/j.matdes.2006.11.004
dc.identifier.endpage274en_US
dc.identifier.issn0261-3069
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-34548607783en_US
dc.identifier.scopusqualityN/Aen_US
dc.identifier.startpage265en_US
dc.identifier.urihttps://doi.org/10.1016/j.matdes.2006.11.004
dc.identifier.urihttps://hdl.handle.net/20.500.14551/25163
dc.identifier.volume29en_US
dc.identifier.wosWOS:000250491600033en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.language.isoenen_US
dc.publisherElsevier Sci Ltden_US
dc.relation.ispartofMaterials & Designen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMedium-Carbonen_US
dc.subjectSteelen_US
dc.subjectDeformationen_US
dc.titleAn experimental study on joining of severe plastic deformed aluminium materials with friction welding methoden_US
dc.typeArticleen_US

Dosyalar