Doğal gaz depolama, dağıtım ve kontrol amaçlı ölçüm istasyonu tasarımı
Dosyalar
Tarih
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Erişim Hakkı
Özet
Doğal gaz ana boru hatlarıyla veya sıvılaştırılmış doğal gaz şeklinde belirli noktalara taşındıktan sonra, “dağıtım sistemi” adı verilen boru hatları ile tüketici kullanımına sunulur. Ana boru hattından ya da sıvılaştırılmış doğal gaz terminalinden alınan gaz, dağıtım sistemleri boyunca çeşitli düzenlemeler ve ölçümlerden geçer.Doğal gaz dağıtım sistemlerinin en önemli bölümü basınç düşürme ve ölçüm istasyonlarıdır. Bu istasyonların amacı, tüketicinin kullanabileceği basınçta ve sıcaklıkta doğal gaz sağlamak, verilen gaz miktarını belirlemek ve doğal gazı filtreden geçirerek tüketici donanımlarına zarar verebilecek katı tanecikler ve sıvılardan temizlemektir. Sadece büyük basınç düşürmelerinde ve çevre sıcaklığının normalden az olduğu bölgelerde, “Joule-Thomson” etkisi sonucunda sıcaklığı azalacak olan gazın hidrat oluşturmaması için düzenleme (regülasyon) öncesinde gaz ısıtılabilir. Tüketim kapasitelerini doğru karşılamak için, uygun basınç düşümünü sağlayacak düzenleyici (regülatör) tipi ve duyarlı debi ölçümleri yapan sayaçlar belirlenir.Doğal gaz basınç düşürme ve ölçüm istasyonları güncel ve gelecekteki gaz gereksinimlerini sürekli ve güvenli bir şekilde karşılamalıdır. Tüketiciye kesintisiz gaz verebilmek için, donanımın arıza veya bakımlarında dahi, istasyon yedek ve bypass hatları ile donatılmış bulunmalıdır. Gelecekteki kapasite artışları karşısında doğal gaz tüketimini karşılayabilmek için istasyon donanımları geliştirilmeye uygun tasarlanmalıdır.Tüm bunları sağlayan basınç düşürme ve ölçüm istasyonları, diğer yandan korunum ve çevre sağlığı standartlarını da karşılamak zorundadır. Bütün bunlar, bir istasyonun doğru seçilmiş donanımla ve ilgili gaz kuruluşlarının şartnamelerine uygun tasarlanması ve verimli bir şekilde işletilmesi ile mümkündür.
After natural gas is either carried through main pipe lines or transported to some stations places as liquid natural gas, it is presented to the consumers via “distribution system” pipe lines. The gas, which was taken from either the main pipe line or the liquid natural gas terminal, is regulated and measured all the way through the distribution systems. Regulation and Measuring Stations are the most important sections of the natural gas distribution systems . The main purposes of these stations are to produce gas with a proper pressure and temperature for the consumers; to precisely calculate the amount of the distributed gas and filtering solid and liquid stuff, which might be harmfull for the consumer’s equipment, out of the gas. Only in case of huge pressure reductions and in the areas with very low temperature (below normal values), the gas, which would have a lower temperature due to “Joule-Thomson” impact , might be heated before the regulation so that it does not produce hydrate . In order to properly calculate consumption capacity, regulator type sensitive meters, which are able to reduce the pressure and measure the flow rate, are determined. The natural gas regulation and measuring stations must meet the current and future gas need regularly and safely. The station must be equipped with both spare and bypass lines so that the consumers have always gas even in case of a failure or during a maintenance period. The station must be open to any upgrade considering possible capacity increase in the future. Along with these features, the natural gas pressure reduction and measurement stations must meet the requirements for environment health and security standards as well. These are possible only if the station is designed with the right equipment as listed in the specifications by relevant gas organizations and managed in a productive way.